The MOT Test Explained Including All Test Details

Is your car more than 3 years old and it is time for it to go for an MOT test? Are you not sure about what tests will be performed and if your car is going to pass or not? If you are not aware of what goes on in an MOT test, then take it to one of the local garages in Kettering as well as reading this guide that will definitely help you know the details with a full explanation.

The car law

You may have heard your friends saying that their car did not pass the MOT test and now they have to buy a new one but didn’t know the law behind this test. Well, as per the laws of the road, any car that is more than 3 years old have to pass a yearly MOT test to make sure they are roadworthy. The test results are simple to understand. Your car will either pass or fail and there is no grey area that you can utilise to bypass the laws. If your car fails the test then you’ll need to consider getting car servicing and repairs done at your local car garage.

The MOT test details

The MOT test involves thorough checking of all the parts of the car. Here are the criteria that the car has to pass:

1. Lights, sound, and electrical equipment

All the lights of the car starting from the rear, front, indicator, fog, registration plate, and brake lights and also the rear reflectors must be in good condition, secure and correctly positioned, shows the correct light, switches on with a single click, not obscured, and not get disturbed when other lights are operated.

The horn should have a uniform note and must be loud so that another car driver can hear it properly.

The electrical wiring should be secure enough without any signs of damage.

The battery should not have any signs of leakage of electrolytes.

All the electrical sockets have to be in good condition too.

2. Tyres and road wheels

The tyres used should have an appropriate load rating and speed for the vehicle. Along with the tyre, the tread depth will be check which should be 1.6mm or more. The road wheels have to be in good shape.

3. Steering, suspension, and brake

The strength and condition of the car’s steering wheel will be checked and if it has a locking device, then it should only lock the engine. The shock absorbers and suspension components will be checked for distortion, fractures, and corrosion.

With regards to the brake, the levers and pedals along with the brake will be tested for efficiency.

4. Body and fuel

Engine mountings, chassis, doors, seats, seat belts, and the overall body of the car will be checked for sharp edges and corrosions. The VIN and registration plates must be clearly visible and the speedometer has to work accurately.

There will be detailed checks on the fuel system for the seal on the tank cap and leaks in the tank. The exhaust system has to be leak-free. Also, there will be a smoke emission test to ensure that the car does not emit dense black or blue smoke.

5. Windscreen and wipers

The wing mirrors, rearview mirrors, washers, wipers, ad n windscreen must work smoothly without any obstruction.

So, these are the tests that your car will have to pass. If there are minor failures, you will be able to use the car provided you get the fault fixed within the given time.

Comments are closed.